Sipes Site Map About US Products Water Borne (Emulsion) Finishes Duraseal Latex Sealer 1800 Bukky Putty Wall Putty Q-Tone Hi-Tone 2700 Si-Tone 700 Bond 2000 Duracril 7000 Duracril 6000 Duracril 5000 Roll-Tex Alkyd Base Finishes Luxury 313 Gold Crown200 Gold Crown 300 Gold Crown 800 Super Enamel 900 Wood Finishes Varno say seal Gloss 223 Semi Gloss 224 Flat 225 Heavy Duty Coatings Ply-Seal Ply-Tone Ply-Tex Transurethane3.43 Tarnspoxy 4.67 Special Effect Finishes Sipestar Si-Patine Si-Stucco Multi-Purpose Coating Effect First Paint Remover Quick Dry-Varnish Quick Dry-Enamel Magic-Bond White Glue Paint Thinning (Thinner) Color Trend Psychology of Color Choosing Color Decorating Design Tip Interior Paint Tips Store Locatoer Contact Us
Duraseal Sealer
WATER BORNE
Acrylic Pigmented Sealer For Exterior  
 
 
 
 
download
specifications

Download free PDF eBook 37 KB

 
Duraseal paint is a premium quality primarily based on acrylic copolymer, for sealing walls and ceiling. especially formulated to seal off new walls, and ceiling as well as old painted surfaces of unknown origin, water resistance & Alkaline resistance.
Suitable for use on exterior and interior surfaces including concrete, cement, gypsum and previously painted surfaces.
Due to good penetrating behavior to fill surface porosity, it can be used to improve the hiding power for the top coats.

The surfaces should be dry, clean and free from contaminates such as grease, oil & dust, which can result in poor adhesion of the paint to the surface use a suitable solvent for cleaning old flaking paint or poorly bound surfaces must be removed completely.

New Surfaces:
Apply one coat Duraseal on cement, concrete and gypsum surfaces after cleaning process and complete drying.

Repainting:
Cement surfaces should be cleaned with water and soap, rinse thoroughly with water to insure that the surface is free from all contaminates, then allow the surface to dry well, for flakes or defect painted surface use a sanding paper to release it then apply one coat of Duraseal.

1- Keep away from direct sunlight with good ventilation.
2- Keep out of reach of children and direct flame.
3- Avoid eye contact and skin for a long time, if it happened, wash thoroughly with fresh water immediately.


Print This Page Click Here to Bookmark This Site!

SIPES is a registered trademark Universal Paints Co.
©1997-2005 personaeg.com.