Wall Putty is a high grade quality based on latex emulsion, and high solids content to provides excellent smoothing and filling properties to small halls crakes. Ideal for filling joints and pores surfaces which can be applied by putty knife or steel trowel to provided excessive thickness are not applied in application. Wall Putty can be used as a repair filler or for full skim coat application, and can be over coated with solvent or water born coatings.

The surfaces should be dry, clean and free from contaminates such as grease, oil, dust, which can result in poor adhesion of the paint to the surface. Use a suitable solvent for cleaning, old flaking paint or poorly bound surfaces must be removed completely.

New Surfaces:
Plaster:
Surface should be treated with diluted Latex Sealer1800, then allow the surface to dry, apply one or two coats of Latex Wall Putty depending on the surface.

Wood:
Surface should be prepared by using one coat of diluted Luxury Undercoat 313, then apply one or two coats of Latex Wall Putty.

Repainting:
Cement surfaces should be cleaned with water and soap, rinse thoroughly with water to insure that the surface, is free from all contaminates then let the surface to dry well for flaks or defect painted surface, use a sanding paper to release it then apply one or two coats of latex wall putty.