Bond 2000 is a product of high quality acrylic emulsion semi-glossy based on styrene acrylic emulsion to improve durability and wash ability. Contains antibacterial & anti-fungus materials. Available in white color and a very wide range of colors by using a color dispensing machine.

For interior and exterior wall, ceiling, plaster masonry, asbestos sheets, wall paper & gypsum surface. Recommended mainly for application on surfaces where the surface need to clean several times.

due to exceptional behavior for prevent growing bacteria and fungus so Bond 2000 can be used for painting walls to hospital and all surface which need a long term of protection.

The surfaces should be dry, clean and free from contaminates such as grease, oil, dust, which can result in poor adhesion of the paint to the surface. Use a suitable solvent for cleaning, old flaking paint or poorly bound, surfaces must be removed completely.

New Surfaces:
Seal the surface with Latex Sealer1800 then use two coats of Latex Wall Putty to fill cracks and allow the surface to dry will. Use sanding paper, for a very fine surfaces then apply one coat of Hi-Tone 2700 then allow the surface to dry, apply two coats of Bond 2000.

Repainting :
Previously painted surfaces: release flaks or loose painted surfaces, grease, oils. then wash with rinse thoroughly with water, allow to dry. repeat as in the beginning.