The surfaces should be dry, clean and free from contaminates such as grease, oil, dust, which can result in poor adhesion of the paint to the surface. Use a suitable solvent for cleaning, old flaking paint or poorly bound surfaces must be removed completely.
New Surfaces:
Ply – Tone is independent surface preparation prime with Ply – Seal diluted with 15 % Sipes Spirit after sanding and leveling surface with an appropriate putty ( Bukky Exterior Wall Putty ) then two coats of Ply-Tone.
Repainting Pretreatment:
Painted Surfaces, wipe off with crystallized soda and clean with fresh water, then allow surface to dry .
|